2.
Using the hexagon wrench, turn the tensioner (A) counterclockwise and loosen. Then remove the drive belt (B).
Disconnect the battery negative terminal first, then the positive terminal.
Using the hexagon wrench, turn the tensioner (A) counterclockwise and loosen. Then remove the drive belt (B).
Disconnect the alternator connector(A), and remove the cable(B) from alternator "B" terminal.
Remove the alternator(A).
Tightening torque :
38.2 ~ 58.8N.m (3.9 ~ 6.0kgf.m, 28.2 ~ 43.4lbf.ft)
Installation is the reverse order of removal.
