Check the handsfree remote control switch for resistance between No.4 and No.5 terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) | Output voltage (±0.22V) |
Call | 4-5 (Left) | 10.71 kΩ | 3.5V |
Hang up | 4-5 (Left) | 18.91 kΩ | 4.0V |
Voice | 4-5 (Right) | 40.91 kΩ | 4.48V |
Switch | Connector terminal | Resistance (±5%) | Output voltage (±0.22V) |
Call | 4-5 (Left) | 10.71 kΩ | 3.5V |
Hang up | 4-5 (Right) | 18.91 kΩ | 4.0V |
Remove the driver airbag module.
(Refer to the RT group - "Airbag module")
Remove the steering wheel.
(Refer to the ST group - "Steering column and shaft")
Remove the steering wheel rear cover (A).
Remove the steering wheel front cover (A) after loosening the screws (4EA).
Remove the audio remote control switch (A) after removing the screws and connectors.
Install the audio remote control switch on the steering wheel.
Install the steering wheel.
Reconnect the handsfree remote control switch connector and airbag connectors.
Make sure that the switch connector is plugged in properly.
Install the driver airbag module.
