3.
Loosen the mounting bolts (2EA) of head lamp. Remove the head lamp assembly (A) after disconnecting the lamp connectors.
note
Take care not to scratch the head lamp lens or fender.
note
Take care that retaining clips (A) is not to be damaged.
Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turned off.
The headlamp bulb should not be removed from the headlamp assembly until just before a new bulb is installed.
Removing bulb for an extended period of time may affect headlamp bulb performance.
Contaminants may enter the headlamp assembly where they can settle on the lens and reflector.
Never turn on the head lamps with the bulb removed from the headlamp assembly.
Disconnect the negative (-) battery terminal.
Remove the front bumper.
(Refer to the BD group - "Front bumper")
Loosen the mounting bolts (2EA) of head lamp. Remove the head lamp assembly (A) after disconnecting the lamp connectors.
Take care not to scratch the head lamp lens or fender.
Take care that retaining clips (A) is not to be damaged.
Remove the bulb caps from the head lamp assembly after turning in the counter clock-wise direction.
A : Head lamp low/high cap
B : Turn signal bulb cap
C : Tail lamp bulb cap
Remove the head lamp bulbs after releasing the lock of the set spring.
A : Head lamp low/high bulb
B : Turn signal bulb
C : Tail lamp bulb
