Installation is reverse of removal.
Fuel sender installation bolts:
2.0 ~ 2.9 N0m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft)
After removing or replacing the part below, bleed air in low pressure fuel circuit (Refer to "Bleeding air in low pressure fuel circuit" in this group).
Fuel tank
Fuel sender
Fuel filter
High pressure fuel pump
Low pressure fuel lines
After removing or replacing fuel system below, must perform fuel leakage test procedure. (Refer to "Fuel leak test" in this group.)
Fuel tank
Fuel sender
Fuel filter
High pressure fuel pump
Injector
Common rail
Low pressure fuel line
