4.
Remove the driver airbag module mounting bolts(2EA).
Set the front tires straight-ahead before removing the steering wheel.
If the steering wheel and the front tires are not set straight ahead together, it affects the number of circulation of steering wheel and the cable inside the clock spring is possible to be damaged.
Disconnect the battery negative cable.
After disconnecting the battery negative cable, wait for at least thirty seconds.
Remove the steering wheel low cover cap.
Remove the driver airbag module mounting bolts(2EA).
Disconnect airbag module connector (A).
Disconnect the horn connector.
Separate the airbag module from the steering wheel.
The removed airbag module should be stored in aclean, dry place with the pad cover face up.
Remove the steering wheel and steering wheel column cover. (Refer to the Steering System group- Steering Column and Shaft)
Disconnect the clock spring and horn connector, then remove the clock spring.
