2.
Remove the brake caliper assembly (B) from the torsion beam axle by loosening the bolts (A).
Tightening torque :
63.7 ~ 73.5N.m(6.5 ~ 7.5kgf.m, 47.0 ~ 54.2lb-ft)
Remove the rear wheel ＆ tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel ＆ tire.
Remove the brake caliper assembly (B) from the torsion beam axle by loosening the bolts (A).
Tightening torque :
63.7 ~ 73.5N.m(6.5 ~ 7.5kgf.m, 47.0 ~ 54.2lb-ft)
Loosen the screw (B).
Remove the wheel speed sensor cable (A) and the loosening the mounting bolts.
Tightening torque :
68.6 ~ 88.3N.m(7.0 ~ 9.0kgf.m, 72.3 ~ 86.8lb-ft)
Remove the wheel speed sensor cable (A) and parking brake cable (B) mounting bracket bolts.
Remove the rear shock absorber (A) from the torsion beam axle by loosening the nut.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Remove the torsion axle (A) from the body loosening the bolts.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Installation is the reverse of removal.
