Inspection
1.

Check for resistance between (Left : No.7 and No.8 / Right : No.6 and No.7) terminals in each switch position.

[Right]
[Left]
[Audio System]

Switch

Connector terminal

Resistance (±5%)

Output voltage (±0.22V)

Channel / Seek up

7-8 (Left)

430 Ω

0.4V

Channel / Seek down

7-8 (Left)

1.1 kΩ

1.0V

Mode

7-8 (Left)

2.11 Ω

1.5V

Mute

6-7 (Right)

3.11 kΩ

2.0V

Volume up

6-7 (Right)

4.61 kΩ

2.5V

Volume down

6-7 (Right)

6.81 kΩ

3.0V

[Audio System + Auto Cruise]

Switch

Connector terminal

Resistance (±5%)

Output voltage (±0.22V)

Channel / Seek up

7-8 (Left)

430 Ω

0.4V

Channel / Seek down

7-8 (Left)

1.1 kΩ

1.0V

Mode

7-8 (Left)

2.11 Ω

1.5V

Mute

7-8 (Left)

3.11 kΩ

2.0V

Volume up

7-8 (Left)

4.61 kΩ

2.5V

Volume down

7-8 (Left)

6.81 kΩ

3.0V

Removal
1.

Remove the driver airbag module.

(Refer to the RT group - "Airbag module")

2.

Remove the steering wheel.

(Refer to the ST group - "Steering column and shaft")

3.

Remove the steering wheel rear cover (A).

4.

Remove the steering wheel front cover (A) after loosening the screws (4EA).

5.

Disconnect the audio remote control switch connector (A) after loosening the screw (1EA).

6.

Remove the audio remote control switch (A).

Installation
1.

Install the audio remote control switch on the steering wheel.

2.

Install the steering wheel.

3.

Reconnect the audio remote control switch connector and airbag connectors.

4.

Install the driver airbag module.

note

Make sure the audio remote control switch and the airbag module connectors are plugged in properly.

Яндекс.Метрика