3.
Measure resistance between Pin No.1(Power) terminal and Pin No.2(Signal) terminal of the Rear RH Wheel Speed Sensor. (Component Side)
Specification : Approx. 3.899 MΩ
Fig.1) Resistance of Rear RH Wheel Speed Sensor
IG Key "OFF".
Disconnect Wheel Speed Sensor connector.
Measure resistance between Pin No.1(Power) terminal and Pin No.2(Signal) terminal of the Rear RH Wheel Speed Sensor. (Component Side)
Specification : Approx. 3.899 MΩ
Fig.1) Resistance of Rear RH Wheel Speed Sensor
Is the resistance of Rear RH wheel speed sensor simular as shown above?
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ If no problems were found with the circuits or connectors, replace the rear RH wheel speed sensor. Go to "Verification of Vehicle Repair" procedure. |
