2.
Install the clutch pedal mounting nuts (A-2ea).
Tightening torque
9.8 ~ 14.7 N.m (1.0 ~ 1.5kgf.m, 5.8 ~ 10.8Ib-ft)
Apply the specified grease to the snap pin and washer.
Wheel bearing grease : SAE J310, NLGI No.2
Install the clutch pedal mounting nuts (A-2ea).
Tightening torque
9.8 ~ 14.7 N.m (1.0 ~ 1.5kgf.m, 5.8 ~ 10.8Ib-ft)
Connect the push rod to the clutch pedal by installing the snap pin (A) and washer (B).
Connect the flexible hose (A) of the brake reserve tank to the master cylinder.
Tightening torque
12.8 ~ 16.7 N.m (1.3 ~ 1.7kgf.m, 9.4 ~ 12.3Ib-ft)
[LHD]
Install the fuel pump, battery, and the ECU in order.
[RHD]
Connect the clutch tube (B) to the master cylinder.
Tightening torque
12.8 ~ 16.7 N.m (1.3 ~ 1.7kgf.m, 9.4 ~ 12.3Ib-ft)
Bleed the air in the clutch system.(refer to Bleeding in Serive Adjustment Procedure)
