1.
Remove the shift lever knob (A) and upper cover (B). [Refer to "Interior(Console)" in BD group]
Remove the shift lever knob (A) and upper cover (B). [Refer to "Interior(Console)" in BD group]
Remove the center console. [Refer to "Interior(Console)" in BD group)
Remove the snap pin (A) and remove the select cable assembly.
Remove the cable assembly by pulling the marking parts.
Remove the shift lever assembly by removing the bolts (4ea).
Remove the retainer (A) and nuts (B).
Remove the select and shift cable assembly from the transaxle. (Refer to Manual Transaxle removal).
Check the select cable for proper operation and for damage.
Check the shift cable for proper operation and for damage.
Check the boots for damage.
Check the boots for wear abrasion sticking, restricted movement or damage.
Check for the weak or damaged spring.
Install the cable assembly placing the select and shift lever in neutral position. (Refer to Transaxle installation).
Install the retainer (A) and nuts (B).
Tightening torque :
11.8~14.7 N.m (1.2~1.5 kgf.m, 8.7~10.8 lb-ft)
Install the shift lever assembly by installing the bolts (4ea).
Tightening torque :
8.8~13.7 N.m (0.9~1.4 kgf.m, 6.5~10.1 lb-ft)
Install the cable with the clip to the shift lever.
Move the slide clip (A) in the direction as shown in the illustration in order to adjust the slide clip fit into the select lever.
Install the snap pin (A) to hold the select cable assembly.
Install the center console. [Refer to "Interior(Console)" in BD group)
Install the shift lever knob (A) and upper cover (B). [Refer to "Interior(Console)" in BD group)
