3.
Remove the shift cable assembly by pulling out the clamp as shown in the illustration.
Remove the center console (Refer to Console in BD group)
Remove the snap pin (A) and remove the shift cable assembly (B) from the shift lever assembly.
Remove the shift cable assembly by pulling out the clamp as shown in the illustration.
Remove the shift lever assembly (A)by removing the bolt.
Tightening torque :
9.8 ~ 14.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
Install in the reverse order of removal.
