3.
Remove the shift cable assembly by pulling out the clamp as shown in the illustration.
Remove the center console (Refer to Console in BD group)
Remove the snap pin (A) and remove the shift cable assembly (B) from the shift lever assembly.
Remove the shift cable assembly by pulling out the clamp as shown in the illustration.
Remove the retainer (A) after loosening nuts (B).
Tightening torque :
9 ~ 14 N.m (0.9 ~ 1.4 kgf.m, 6.0 ~9.5 lb-ft)
Remove the cable (B) from the bracket (A) at transaxle assembly side.
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
Remove the shift cable by pulling it toward the interior.
Install in the reverse order of removal.
