3.
Disconnect the solenoid valve connector (A).
Turn ignition switch OFF.
Remove the air cleaner assembly.
(Refer to "Intake and Exhaust system" in EM group)
Disconnect the solenoid valve connector (A).
Measure the resistance between power terminal (14) and signal terminal (8).
Specification : Approx. 0.88 MΩ
Remove the valve body assembly.
(Refer to "Valve Body" in Hydraulic System in this group)
Disconnect the input & output speed sensor connector (A).
Remove the input & output speed sensor (B) after loosening the bolts.
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Install in the reverse order of removal.
Refill the automatic transaxle with fluid.
(Refer to "Fluid" in Hydraulic System in this group)
Confirm that there is no fluid leakage on connections after repairing.
