Replacement
Front Seat Belt Replacement
caution

When installing the belt, make sure not to damaged the pretensioner.

1.

Remove the following items first.

A.

Front seat assembly

(Refer to the BD group – “Front Seat”).

B.

Front and rear door scuff trim

(Refer to the BD group – “Interior Trim”).

2.

Remove the front seat belt lower cover (A).

3.

After loosening the mounting bolt, then remove the front seat belt lower anchor (B).

Tightening torque:

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.

Remove the center lower pillar trim (A).

5.

After loosening the mounting bolt, then remove the center upper pillar trim (A).

6.

Loosen the mounting bolt, then remove the upper anchor (A).

Tightening torque :

39.2~53.9 N.m (4.0~5.5 kgf.m, 28.9~39.8 lb-ft)

7.

After disconnecting the pretensioner connector lock pin, remove the SIS connector (A), Loosening the mounting bolt, then remove the pretensioner (B).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

8.

Installation is the reverse of removal.

Hight Adjuster Replacement
1.

Remove the following items first:

A.

Front seat assembly

(Refer to the BD group – “Front Seat”).

B.

Front and rear door scuff trim

(Refer to the BD group – “Interior Trim”).

C.

Front seat belt lower anchor.

D.

Front seat belt upper anchor.

E.

Center fillar lower trim.

(Refer to the BD group – “Interior Trim”).

F.

Center fillar upper trim

(Refer to the BD group – “Interior Trim”).

2.

After loosening the bolt, then remove the hight adjustor (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.

Installation is the reverse of removal.

note

Replace ant damaged clips.

Make sure the height adjust properly.

Front Seat Belt Buckle Replacement
1.

Remove the following items first:

A.

Front seat assembly

(Refer to the BD group – “Front Seat”).

2.

Disconnect the air bag connect (A) mounting clip.

3.

After loosening the mounting bolt, then remove the front seat belt buckle (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.

Installation is the reverse of removal.

Яндекс.Метрика