3.
Remove the screws (7EA) from door module (A) and connectors (B).
[LHD]
[RHD]
Disconnect the negative battery terminal.
Remove the front door trim.
(Refer to the BD group - "Front door")
Remove the screws (7EA) from door module (A) and connectors (B).
Remove the driver door module (A) from front door trim.
Be careful not to damage the hook when removing the switch module.
Install the driver door module and connectors.
Install the front door trim.
Remove the front door trim and power door mirror switch module (A).
(Refer to the BD group - "Front door")
Check for the continuity between terminals of power door mirror switch according to the table.
